Useful Information; Caractéristiques Techniques - Atlas Copco LUM10 PR21 Manual De Instrucciones

Safety Information
• Exposure to vibration can cause disabling damage to the
nerves and blood supply of the hands and arms. Wear
warm clothing and keep your hands warm and dry. If
numbness, tingling, pain or whitening of the skin occurs,
stop using tool, tell your employer and consult a physi-
cian.
• Hold the tool in a light but safe grip because the risk
from vibration is generally greater when the grip force is
higher. Where possible use a suspension arm or fit a side
handle.
• To prevent unnecessary increases in noise and vibration
levels:
• Operate and maintain the tool, and select, maintain and
replace the accessories and consumables, in accordance
with this instruction manual;
• Do not use worn or ill-fitting screwdriver bits, sockets or
extensions.
Workplace hazards
• Slip/Trip/Fall is a major cause of serious injury or death.
Be aware of excess hose left on the walking or work sur-
face.
• Avoid inhaling dust or fumes or handling debris from the
work process which can cause ill health (for example,
cancer, birth defects, asthma and/or dermatitis). Use dust
extraction and wear respiratory protective equipment
when working with materials which produce airborne
particles.
• Some dust created by power sanding, sawing, grinding,
drilling and other construction activities contains chemi-
cals known to the State of California to cause cancer and
birth defects or other reproductive harm. Some examples
of these chemicals are:
• Lead from lead based paints
• Crystalline silica bricks and cement and other ma-
sonry products
• Arsenic and chromium from chemically-treated rub-
ber
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your ex-
posure to these chemicals: work in a well ventilated area,
and work with approved safety equipment, such as dust
masks that are specially designed to filter out micro-
scopic particles.
• Proceed with care in unfamiliar surroundings. Be aware
of potential hazards created by your work activity. This
tool is not insulated from coming into contact with elec-
tric power sources.
• This tool is not recommended for use in potentially ex-
plosive atmospheres.
DO NOT DISCARD – GIVE TO USER
6 © Atlas Copco Industrial Technique AB - 9834 2740 00
Signs and stickers
The product is fitted with signs and stickers containing im-
portant information about personal safety and product main-
tenance. The signs and stickers shall always be easy to read.
New signs and stickers can be ordered by using the spare
parts list.

Useful Information

Website
Information concerning our Products, Accessories, Spare
Parts and Published Matters can be found on the Atlas Copco
website.
Please visit: www.atlascopco.com.
ServAid
ServAid is a portal that is continuously updated and contains
Technical Information, such as:
• Regulatory and Safety Information
• Technical Data
• Installation, Operation and Service Instructions
• Spare Parts Lists
• Accessories
• Dimensional Drawings
Please visit: https://servaid.atlascopco.com.
For further Technical Information, please contact your local
Atlas Copco representative.
Caractéristiques techniques
Données produit
Pression de service maximum
Vitesse à vide
Poids
Déclarations
Responsabilité
De nombreux événements dans l'environnement d'exploita-
tion peuvent affecter le processus de serrage et nécessiteront
une validation des résultats. Conformément aux normes et rè-
glements applicables, nous vous invitons par la présente à
contrôler le couple installé et le sens de rotation après tout
évènement susceptible d'avoir une incidence sur le résultat
du serrage. Voici des exemples non exhaustifs de ces évène-
ments :
LUM10PR21
7.0 bar
(100 psig)
2000 r/min
( rpm)
0.4 kg
(0.9 lb)