Safety Information - Nokia СК-10 Guia De Instalacion

2. Installation

■ Safety information

Follow these basic safety guidelines when installing the car kit.
• Note that the instructions in this installation guide are general
guidelines which apply for the installation of the Nokia CK-10 car kit
in an automobile. Due to the wide variety of car types and models
available, this guide cannot consider the individual technical
requirements relevant for any particular vehicle. Contact the vehicle
manufacturer for further detailed information about the vehicle in
question.
• Make sure that the car ignition is off and disconnect the car battery
before beginning the installation. Ensure that it cannot be
reconnected inadvertently.
• Modern automotive systems include on-board computers where
important vehicle parameters are stored. Improper disconnection of
the car battery may cause loss of data, requiring extensive effort for
re-initialization of the system. If you have any concerns, contact
your car dealer before any installation work.
• The phone holder is to be fixed onto the hands-free unit in the
cockpit area where the display is clearly visible for the user but does
not interfere with the control or operation of the vehicle. The keypad
should be within easy reach of the user.
• All equipment must be mounted so that it does not interfere with the
operation of the vehicle. Make sure not to impact the steering or
braking systems or other key systems essential for proper operation
of the car when installing the car kit equipment. Make sure that
deployment of the airbag is not blocked or impaired in any way.
• Do not smoke when working on the car. Make sure that there is no
source of fire or flame nearby.
• RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles, for example, electronic fuel
injection systems, electronic antiskid braking systems, electronic
I n s t a l l a t i o n
9