Repeat Playback - Teac P-70 Manual Del Usuario

Repeating all tracks
In playback or stop mode, pressing the REPEAT button of the
remote control unit turns the repeat function on and off (the
REPEAT indicator lights when it is on).
The repeat function plays back all tracks, and restarts
playback from the beginning when it comes to the end. This
repeats.
< In programmed playback, all tracks selected for the program
are repeatedly played back in the program order.
Repeating one track
You can use the single playback (see page 16) and the
repeat playback functions together in order to play back
only one track repeatedly.
< In programmed playback, if only one track has been
programmed, that track only is played back repeatedly.
All manuals and user guides at all-guides.com

Repeat Playback

A-B Repeat
You can select and play back a specified part of the disc
repeatedly.
During playback, when you reach the start of the part you
want to repeat (the A point), press the A-B button of the
remote control unit.
The indicator lights, and the A-B indicator starts to flash.
When playback reaches the end of the part you want to
repeat (the B point), press the A-B button again. The
selected portion (A-B) is now played back repeatedly.
< To cancel the A-B repeat, press the A-B button once more
after setting the B point. A-B repeat is disabled, and ordinary
playback restarts.
< After you have set the A point, you can skip across track
boundaries, and fast-forward to the location that will
become the B point by pressing the forward SKIP button or
the forward SEARCH button.
< This A-B repeat function is not available in programmed
playback or single playback.
17