Teac P-70 Manual Del Usuario página 9

All manuals and user guides at all-guides.com
CAUTION
< Only connect the power supply after completing all other connections.
< Always read and follow the documentation of other units you are connecting to the P-70.
< If you are using the P-70 together with the D-70, make sure that you read and understand page 9 of
the D-70 users' manual.
1
DIGITAL OUT terminals
Connect one of the digital output terminals of the P-70, (XLR, RCA, OPTICAL) to the appropriate
digital input terminal of the D/A converter.
Use commercially-available cables for making connections as follows:
XLR(BALANCED): balanced XLR-type digital cable
RCA(COAXIAL): RCA coaxial cable
OPTICAL: optical digital cable (TOS)
< XLR1(R) and XLR2(L) correspond to the Dual AES standard. When the D/A converter also
corresponds to this standard, connect the L and R terminals of the player to the corresponding
inputs of the D/A converter using two XLR cables. If the UP Convert switch of the unit is ON and
set to 4Fs, you can hear and enjoy playback at 176.4 kHz.
< If a D/A converter has only one XLR terminal, or is connected using a coaxial RCA or OPTICAL
cable, the frequency is 44.1 or 88.2kHz.
< Keep the supplied caps to cover OPTICAL terminals when they are not in use.
When you are using a terminal or terminals, the corresponding switch should be ON. If the switch
is not ON, no signal is output. We suggest that to obtain optimal sound, the switches of unused
terminals are turned OFF.
2
WORD SYNC terminals
When you use word sync, connect the WORD SYNC IN terminal of the P-70 to the WORD SYNC
OUT terminal of the D/A converter using a commercially-available BNC coaxial cable.
< The THRU terminal (auto-terminating) echoes the signal received at the IN terminal. Use this if you
are connecting another unit with a WORD SYNC IN terminal.
3
SIGNAL GND
You may improve the sound quality by connecting the D/A converter to this earth terminal using a
commercial PVC-covered electric cord.
< This is not a safety earth.
4
AC Power Cord
After all other connections have been made, insert the AC power cord included with the player to
the socket. Then insert the plug in the wall socket.
Do not use any power cords other than the one included with the player to avoid fire, electric
shock, etc. If you are not going to use the unit for some time, disconnect the power cord from the
wall socket.
9