Tabla De Contenido; Contents; Features - Teac P-70 Manual Del Usuario

Thank you for choosing TEAC. Read this manual carefully to get
the best performance from this unit.
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Before Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Names of Each Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
How to use the remote control unit . . . . . . . . . . . . . . . . . . . . . . 12
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Index searching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Playing back one track (single playback) . . . . . . . . . . . . . . . . . 16
Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Delete Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Display type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
How to turn off the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Auto Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Timer playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
VRDS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4
All manuals and user guides at all-guides.com

Contents

Features

VRDS mechanism (employing a aluminum
tapered turntable and turntable bridge)
The VDRS assembly, though secure clamping to a turntable of
the same diameter as the disc being played, totally removes
unnecessary vibration; either from mechanical sources, or
from the typical vibration of a disc. Rigidity is also achieved
through the use of a turntable bridge composed of precision-
processed carbon tool steel. The shape of the turntable also
helps to correct any warp in the disc. Because of the precise
alignment of the optical axis produced by this arrangement,
the servo current is reduced. All of the above factors decrease
the disc read error rate, and help to prevent timing errors from
the clock circuit.
Word Sync
The P-70 can achieve word synchronization by accepting a
master clock from any suitably-equipped D/A converter. With
the converter acting as the master clock, any jitter resulting
from data transfer between the player and the converter is
essentially eliminated.
Twin-transformer structure, with the power
supply completely separated from the
mechanical and digital signal systems
To eliminate mutual interference, the important key
components of the player: power supply, mechanism control,
and digital system (word sync, frequency multiplier, and clock)
have been separated completely in the design. There are two
split-core transformers in the power supply for additional
interference rejection.
7 digital outputs, including 4 digital outputs
from the converter multiplier (2xFs, 4xFs)
The player has four (XLR x 2, RCA x 1, TOS x 1) digital output
terminals to handle the high-speed multiplied digital outputs
(2xFs:24 bits at 88.2kHz, 4xFs: 24 bits at 176.4kHz), in addition to
3 "standard" digital output terminals (RCA x 1, TOS x 2)
44.1kHz.
Following the dual AES specification, 4xFs (24bits at 176.4kHz)
audio is output from twin XLR terminals
The operational algorithm employed in the converter multiplier
circuit is the RDOT method; exclusive to TEAC Corporation.
High rigidity chassis and triangular pinpoint
feet
Based on 8 mm thick sheet steel, with the VRDS mechanism
attached directly, and employing H-type 20 mm thick extruded
aluminum. The front panel and the sides employ a construction
method in which the 1.6 mm thick sheets are first plated with
copper, and then with nickel. This two-layer design succeeds
in totally removing internal interference, and helps to optimize
the sonic performance.
With the triangular pinpoint feet composed of case-hardened
tool steel, vibration is almost completely eliminated.