Remote Control; Safety Features - Pur Line HOTI T100 Manual Del Usuario

TEMPERATURE BUTTON
Press repeatedly to increase the desired room temperature, the desired temperature will flash for 3 seconds,
before the appliance returns to displaying the room temperature. When the desired temperature has been
reached, the appliance will switch to fan mode.
AMBIENT LIGHT BUTTON
Press the light button to switch on the ambient light: blue, green, purple or white.
ON/OFF BUTTON
Press to turn the heating on or off.

SAFETY FEATURES

- The appliance is equipped with a protection system that shuts down the appliance in the event of tipping
over.
- A thermal overload protector is built in to prevent overheating.
- When an overheating temperature is reached, the heater will automatically switch off. It can only resume
operation after restarting the appliance.
Reset :
- Unplug the heater and wait for the appliance to cool down.
- Then switch the appliance back on and use as normal.

REMOTE CONTROL

The remote control has the same functions as the control panel.
The remote control is powered by a lithium button cell battery (CR2025). If the remote
control does not respond, replace the battery:
1. Turn the remote control over and press the tab to the right.
2. Slide out the battery tray.
3. Replace the battery with another of the same type, making sure that the positive
side is facing upwards.
10