Publicidad
Step 16
Carefully stand your unit upright.
å
Push the RUBBER SLEEVES (HH) over the METAL PINS (GG). Insert the METAL PINS into the hole locations of your choice
å
in the ENDS (A and B) and UPRIGHT (C). Set the ADJUSTABLE SHELVES (L) onto the METAL PINS.
NOTE: Before inserting a drawer, be sure the INNER CARTRIDGE in the EXTENSION RAIL on your unit is all the way
å
forward. The INNER CARTRIDGE should click into place against the BLACK TAB.
To insert a drawer into your unit, line up the EXTENSION SLIDES on the drawer with the EXTENSION RAILS on the unit
å
and push the drawer into the unit until the drawer is fully inserted. The drawer will push in hard until it is all the way in, then
it will slide in and out easier.
Front
Black tab
GG
(8 used)
HH
Page 20
Click the inner cartridge into place against the black tab.
Inner cartridge
B
O2
O2
Extension Rail
L
C
P2
P2
409242
L
A
www.sauder.com/services
Publicidad
