Authorized Users; Preparation By The User; Space Requirements; Foundation And Connections - Beissbarth VLH 4440 Manual Original

en 30 | VLH 4440 | Obligations of the plant operator
5.2

Authorized users

Only users aged 18 or above who have been instructed
on how to operate the lifting platform and have proven
their ability to do so to the owner are to be entrusted
with unsupervised operation of lifting platforms. The
task of operating the lifting platform must be expressly
assigned to users by the owner. Authorization to
operate lifting platforms must be granted in writing.
Before loading a vehicle onto the lifting platform, users
should study the original operating instructions and
familiarize themselves with the operating procedures in
several trial runs.
5.3

Preparation by the user

5.3.1

Space requirements

Refer to Appendix A for the dimensions of the lifting
platform.
There must also be a clearance of at least 1 meter
between the lifting platform and fixed elements
(e.g. wall) in all lifting positions.
There must be sufficient space at the ends of the lifting
platform for driving vehicles on and off.
i
To stop vehicles colliding with the ceiling, it is
advisable to fit an overhead light barrier in low-
ceilinged buildings.
5.3.2

Foundation and connections

The user must have the following work performed
before erecting the platform:
R
Construction of the foundation following
consultation with Beissbarth customer service or an
authorized service agent.
R
Routing of the wiring to the installation location.
The user must provide fuse protection for the
connection.
R
Routing of the compressed air connection to the
installation location. The user must install a service
unit upstream of the connection.
i
Refer also to the corresponding information in the
commissioning instructions.
|
1 692 846 001 2017-04-27
5.4

Transportation information

The lifting platform is packaged as follows on delivery:
Packing unit Dimensions
Lifting platform with 492 x 73 x 99 cm
runways and hydraulic unit
Convenience kit (optional) 32.5 x 80 x 197 cm
Lighting kit (optional) 40 x 40 x 20 cm
Axle lift 2.6 t 90 x 60 x 70 cm
SD-26PHL (optional)
The user must provide a fork lift truck for in-house
transportation. The centre of gravity and lashing points
are marked on the packaging.
Fig. 2: Centre of gravity of consignment (example)
5.5

Set-up and initial commissioning

The lifting platform is only to be started up by Beissbarth
customer service or an authorized service agent. Initial
commissioning of the lifting platform is described in the
installation instructions. Acceptance must be performed
by a qualified person after initial commissioning.
5.6

Scope of delivery

Designation
Lifting platform VLH 4440, complete
Original operating instructions
Test log book (en)
5.7

Special accessories (optional)

Designation
Convenience kit
Lighting kit
Axle lift 2.6 t SD-26PHL
Set of 4 turntable holders
Information on further special accessories can be
obtained from your Beissbarth dealer.
Weight
2750 kg
410 kg
10 kg
195 kg
Order no.
Refer to
rating plate
1 692 846 001
1 689 977 085
Order no.
1 692 871 101
1 692 871 102
1 692 871 103
1 692 871 106
Beissbarth GmbH