Identifying The Parts (Buttons) - Teac SR-LUXi Manual Del Usuario

Identifying the Parts (Buttons)

Standby/On (
Use this button to turn
the unit on or put it in
standby (off ).
This button lights when
the unit is turned on.
This button does not
affect the light.
FUNCTION
Each time this button is
pressed, the source changes
as follows:
To simplify explanations, instructions in this manual might
refer to the main unit or remote control only . In such cases,
the same controls on the remote control and main unit will
operate similarly .
8
)
ALARM
Hold down this button for more
than 3 seconds to enter the
wakeup timer setting mode.
This button is also used to turn
the wake up timer function on
and off.
Page 22
SNOOZE
After the wakeup timer
on time is reached, use
this button to turn the
unit to standby (off ) for
10 minutes.
(External source)
DIMMER
Use this button to set the
brightness of the display
to one of three levels.
SLEEP
Use this button
to set the sleep
timer.
Page 21
VOLUME (−/+)
Use these buttons
to adjust the
volume.