Parts Of The Turntable - Teac LPR550USB Manual Del Usuario

L
K
J
A Turntable
B Transport locking screw
Before use, completely loosen the screw by turning it clockwise
with a coin or screwdriver .
Side view of transport locking screw
During transport
(when shipped
from the factory)
When you transport the unit, turn the screw counterclockwise to
secure the turntable .
C Cue-lever
Use this lever to lift the tone arm .
D Tone arm holder
Gently push the clamper to the right to release the tone arm .
E
Speed selector
Select the speed suitable for the record .
F Tone arm
When you move the tone arm to inside, the turntable will begin
to turn .

Parts of the Turntable

G Cassette tape operation button
PLAY (y)
Use this button to play a tape .
F.FWD (,)
Use this button to fast-forward a tape .
REW (m)
Use this button to rewind a tape .
STOP (H)
Use this button to stop playing a tape .
During use
PAUSE (J)
Use this button to suspend playing/recording temporarily .
Never press the PLAY button (y) and REW button (m) at
the same time .
H Cassette holder
Insert a cassette tape with the exposed tape in front and the side
you want to play facing up .
I TAPE switch
When playing a normal tape (type I), set the TAPE switch to
NORMAL . When playing a chrome tape (type II) or metal tape
(type IV), set the switch to HIGH .
J USB
Connect this unit to a USB port on your computer so that sound
signals from the unit are converted into digital data and sent to
the computer .
K
LEVEL
Turn this knob to adjust the sound level for digital conversion .
L 45 RPM adaptor
When playing a 45 RPM large-hole single record, use the adaptor .
To remove the adapter, slide the stopper for holding the adapter
to the side .
Before use, detach the
stylus guard (white
plastic cover) by pulling it
straight off the front of the
cartridge in the direction of
the arrow .
11