Oster BVSTEM8100 Manual De Instrucciones página 41

P R EPA R IN G C A P PU C CIN O O R LAT T E
Recommendations:
• Clean the automatic milk dispensing system before first and each use
• Use cold milk (at a temperature of approximately 5°C/41°F), It is recommended to
use whole milk to ensure an optimal frothing result.
1. Make sure the milk dispensing system is properly installed.
2. Fill the milk container with milk and close the lid.
3. Place a cup under the spout.
4. Switch on and press Cappuccino or Latte button. The indicator keeps on during
preparation process.
5. The espresso maker dispenses milk first and then coffee.
6. Preparation will stop automatically. If you want to stop, press the button again during
the operation.
7. Remove milk container from espresso maker and put it in the fridge. Do not leave for
more than 1 day and clear regularly.
8. After use, see section "Daily Cleaning of the appliance", for cleaning the automatic
milk froth system.
IMPORTANT:
• Steam and hot milk may splash from the spout when you start brewing.
This is normal behavior of the appliance.
• Place the milk connection tube around the lid of the milk container after use. Do not
let it fall freely to prevent the milk from leaking out due to the pressure difference.
En g lish -14