Mode Selection - Oster BVSTEM8100 Manual De Instrucciones

MODE SELECTION

The espresso maker has three different settings: default setting, ECO mode and speed
mode. In ECO mode, the appliance helps to save more energy. In speed mode, the user
can make their coffee faster than in default setting.
Illumination Light
Pre-brewing*
Auto shut-off time
Cup Volume memory Yes
*Note: The pre-brewing function moistens the coffee grounds in the brewer with a small
amount of water before full extraction. This expands the coffee grounds to build up a
greater pressure in the brewer which help extraction of all the oils and full flavor from the
coffee grounds.
1. When the espresso maker is on standby, press and hold the ON/OFF button
5 seconds.
2. The function buttons will have their lights on or flashing as follows.
In ECO Mode
In Speed Mode
In Default Setting
Press the Hot water button for ECO mode, Lungo for default mode and Espresso for
speed mode. Two Beep sounds indicate that the mode is being selected. (Note: If you
are pressing the button for each mode, the espresso maker will not response).
4. If you would like to leave the setting unchanged, press ON/OFF button
wait for 5 seconds for the espresso maker to return to the standby condition.
ECO Mode Speed Mode
No Yes
Yes No
10mins 30mins
Yes
!
!
!
Hot water
Light ON
Flashing
Flashing
En g lish -20
Default Setting
Yes
Yes
20mins
Yes
!
!
Lungo button Espresso button
!
Flashing
Flashing
Light ON
!
!
!
for
Flashing
!
Light ON !
!
Flashing
!
!
!
again or