P Ro B Le M S, C A U Se S A Nd S Olu T Ions - Oster BVSTEM8100 Manual De Instrucciones

P RO B LE M S, C A U SE S A ND S OLU T IONS

PROBLEM
The appliance does not work.
No or delayed response in
several trials of pressing on
function key on the panel.
The coffee is not hot enough.
The coffee cannot come out
from spout.
The first cup of coffee is poor
quality.
Coffee has no crema.
The touch buttons are not
sensitive.
The appliance takes too long
to warm up.
The water tank is removed /
the water level is very low in
the water tank but does
!
not light up.
!
Internal drip tray is filled with
!
water.
Coffee is being brewed too
slowly - droplets only.
CAUSE
The appliance is not plugged
in to an outlet.
Appliance is under an
electromagnetic interference.
Control panel is dirty.
The cups have not been
preheated.
The brewing unit is too cold.
Empty system function maybe
used before.
Not enough coffee was
grinded.
Coffee beans are not fresh.
Not pressing the touch button
from the front direction of the
appliance.
Excessive scale has built up.
The area near the water tank
connector is wet.
Coffee powder too fine, which
blocks water from pouring.
Coffee powder too fine, which
blocks water from pouring.
En glish-2 4
SOLUTION
Plug in and press the switch.
Check the cable and the plug.
Unplug the appliance. Restart
after few minutes.
Clean the panel with the cloth
provided.
Rinse the appliance at least
3 times before making the
coffee.
Press the hot water button
until water comes out from
spout.
Throw the coffee away. The
other coffees will always be of
good quality.
Change to a more fresh coffee
bean.
Press the lower bottom part
of the icon of the touch button
from the front direction of the
appliance.
Descale the appliance.
Wipe the water around the
water tank connector.
Adjust the coffee fineness to
bigger dot in grinder hopper.
Adjust the coffee fineness to
bigger dot in grinder hopper.