Before using the image capture adaptor
This digital still image capture adaptor uses a floppy disk to store the images.
Use the following floppy disk type.
• Size:
• Type:
• Capacity: 1.44 MB
• Format:
If you use a 3.5-inch 2HD floppy disk other than described above, format it using this
unit or a personal computer.
Be sure to read before using the image capture adaptor
Image recording format on this image capture adaptor
The image data recorded with this image capture adaptor is compressed and recorded
in JPEG format. Extension of the file is ".JPG". For details, see page 19.
Precaution on copyright
Television programs, films, video tapes, floppy disk, and other materials may be
copyrighted. Unauthorized recording of such materials may be contrary to the
provision of the copyright laws.
Notes on the Operating Instructions
• The instructions in this operating instructions are for the four models listed below.
Before you start reading this operating instructions and operating the unit, check the
model number by looking at the bottom of the image capture adaptor.
• The MVC-FDR3/FDR3E is the model used for illustration purposes. Otherwise, the
model name is indicated in the illustrations. Any differences in operation are clearly
indicated in the text, for example, "MVC-FDR3/FDR3E only."
As you read through this manual, buttons and settings on the image capture adaptor
are shown in capital letters.
e.g., Press REC.
Types of differences
Model number
LCD screen
TV color system
4
-EN
3.5-inch
2HD
MS-DOS format (512 bytes × 18 sector)
MVC-FDR1
No
NTSC
MVC-FDR1E
MVC-FDR3
No
Yes
PAL
NTSC
MVC-FDR3E
Yes
PAL