Loading Paper - Kyocera KM-6030 Guía De Uso

Loading Paper

For details on the types of paper supported, refer to Paper in the Appendix of the Advanced
Operation Guide.
Before Loading Paper
When you open a new package of paper, follow the instructions as below to fan through
the paper prior to loading.
1
Holding the paper on both sides,
bend the edges downward so that
the middle curves upward.
2
Holding your thumbs in place
toward the center, unbend the
paper so that the bottom sheet is
back at its original position.Your
thumbs should prevent the stack
from straightening out, forming a
hill-like shape.
3
Fluff the paper, raising one hand
and lowering the other, then
alternating. The individual sheets are slightly lifted, separated from each other.
4
Align the sheets by tapping the stack on a flat surface.
If the paper is curled or folded, straighten it before loading. Paper that is curled or folded
may cause paper jams.
IMPORTANT: If you copy onto used paper (paper already used for copying), do not use
paper that is stapled or clipped together. This may damage the copier or cause poor image
quality.
If ejected copies are not flat or are stacked
unevenly, turn the paper in the side feeder over
and reload it.
Avoid exposing opened paper to high
temperatures and high humidity as dampness
may cause copying problems. Seal any remaining
paper after loading the side feeder in its original
package. If the copier will not be used for a
prolonged period, protect all paper from humidity
by removing from the side feeder and sealing in
the original package.
PF-660 OPERATION GUIDE
All manuals and user guides at all-guides.com
English
9