STEINEL L 30 S Instrucciones De Uso página 50

6. Function
L 30 S
6.1
F
G
• Make settings.
Factory settings
– Time setting: 8 seconds
– Twilight setting: daylight mode 2,000 lux
Time setting (F)
The switch-off delay can be set to any period from approx.
8 seconds to a maximum of 35 minutes. Every movement
detected re-activates the light.
Note: after the LED light switches OFF, it takes approx.
1 second before movement can detected again. The LED
light can then switch ON again in response to movement.
– 20 –
Index