Fueling - Stihl HS 82 Manual De Instrucciones

English

Fueling

Preparations
Before fueling, clean the filler cap
N
and the area around it to ensure that
no dirt falls into the tank.
Position the machine so that the
N
filler cap is facing up.
Always thoroughly shake the
N
mixture in the canister before
fueling your machine.
WARNING
In order to reduce the risk of fire and
personal injury from escaping gas vapor
and fumes, remove the fuel filler cap
carefully so as to allow any pressure
build-up in the tank to release slowly.
14
Opening
Raise handle.
N
Twist filler cap counterclockwise
N
(approx. 1/4 turn).
Markings on filler cap and housing must
align.
Remove the filler cap.
N
Refueling
Take care not to spill fuel while fueling
and do not overfill the tank – leave
approx. 1/2" (13 mm) air space.
Closing
Handle is in an upright position:
Position filler cap – markings on filler
N
cap and housing must align.
Push the filler cap down as far as it
N
will go.
HS 82 R, HS 82 T