Stihl HS 82 Manual De Instrucciones página 29

1 Starter Grip
2 Rear Handle
3 Throttle Trigger Lockout
4 Throttle Trigger
5 Blocking Lever
6 Filter Box Cover
7 Manual Fuel Pump
8 Spark Plug Boot
9 Front Handle
10 Carburetor Adjusting Screws
11 Starting Throttle Lock
12 Stop Switch
13 Fuel Filler Cap
14 Fuel Tank
15 Muffler
16 Fan Housing
17 Choke Lever
18 Blade Scabbard
19 Cutting Blade Guard
20 Cutting Blades
# Serial Number
HS 82 R, HS 82 T
Definitions
1. Starter Grip
The grip of the pull starter, for
starting the engine.
2. Rear Handle
The support handle for the hand,
located at or toward the rear of the
hedge trimmer.
3. Throttle Trigger Lockout
Must be depressed before the
throttle trigger can be activated.
4. Throttle Trigger
Controls the speed of the engine.
5. Blocking Lever
Lever for rotating the rear handle.
6. Filter Box Cover
Covers the air filter.
7. Manual Fuel Pump
Provides additional fuel feed for a
cold start.
8. Spark Plug Boot
Connects the spark plug with the
ignition lead.
9. Front Handle
Handle bar for the hand at front of
hedge trimmer.
10. Carburetor Adjusting Screws
For tuning the carburetor.
11. Starting Throttle Lock
Keeps the throttle partially open
during starting.
12. Stop Switch
Switches the engine's ignition off
and stops the engine.
13. Fuel Filler Cap
For closing the fuel tank.
14. Fuel Tank
For fuel and oil mixture.
15. Muffler
Reduces engine exhaust noises
and diverts exhaust gases away
from operator.
16. Fan Housing
Polymer housing which encloses
the power unit.
17. Choke Lever
Eases engine starting by enriching
mixture.
18. Blade Scabbard
Covers cutter blades when hedge
trimmer is not in use.
19. Cutting Blade Guard
Helps to reduce the risk of operator
contact by the cutter blade.
20. Cutting Blades
Steel blades for cutting hedges and
shrubs.
English
27