Nuova Simonelli MASTER Serie Instrucciones De Manejo página 38

DATE-TIME: press ENTER to display the
time already set. The set time will begin to
blink and using the arrow keys, it is pos-
sible to change the hour. Press ENTER to
pass on to the minutes setting, repeat the set-
ting operation using the arrow keys, then
press ENTER to confirm and to pass on to the
day of the week. Use the arrow keys to chan-
ge the day setting and confirm with the
ENTER key. To return to the INSTALLATION
menu, press RESET and to quit the program-
ming phase, press RESET again (the machi-
ne display will read MACHINE READY).
PROGRAMM. ON-OFF: press ENTER to
display the day of the week and the program
status (machine ON and OFF times or alter-
natively, the DAY OFF). If the weekly day off
is set and you wish to set the ON-OFF times,
press ENTER followed by RESET and the
previously set times will appear on the
display. Use the arrow keys to change
the hour and press ENTER to confirm and to
pass on to the minutes setting. Use the
arrow keys to change the minutes and press
ENTER to confirm and to pass on to the fol-
lowing day. PLEASE NOTE: To set or change
the weekly day off, you must display the day
required and press ENTER. Press RESET
from the line displaying the ON - OFF times
and the display will read DAY OFF. Press
ENTER to confirm and to pass on to the fol-
lowing day. When all times and the weekly
day off have been set, you can return to the
PROGRAMM. ON-OFF menu by pressing
RESET. To return to the INSTALLATION
menu, press RESET and to quit the program-
ming phase, press RESET again (the machi-
ne display will read MACHINE READY).
DISCHARGE TIME: Press ENTER, the pilot
lights on the programmable keys will begin
to blink; press one of these keys and use the
34
arrow keys to set the desired time. To
confirm the setting, press ENTER. Repeat
this operation for the remaining keys. To exit
the programming function, press RESET.
To return to the INSTALLATION function,
press RESET and to exit the programming
function press RESET again (the display will
read MACHINE READY).
DISCHARGE OPTION: press the ENTER
key once to display the set number. Use the
arrow keys to choose from the options
FREE DISCHARGE or WITH DRAWER.
When choosing the function WITH
DRAWER, press ENTER to programme the
DREGS NR.. Use the arrow keys
change the number of coffee grounds (min.
20, max. 40), and press ENTER to confirm
this selection. When choosing the FREE
DISCHARGE function (grounds fixed at
200), press ENTER to confirm. To exit the
programming function press RESET (the
display will read MACHINE READY).
CHOOSE LANGUAGE: Press ENTER and
use the arrow keys to choose from the
options ENGLISH or ITALIAN. To confirm this
setting, press ENTER. To return to the
INSTALLATION function, press RESET and
to exit the programming function press RESET
(the display will read MACHINE READY).
MANUAL STOP: Available only in the
SELF SERVICE version push ENTER and
through arrows, select "ENABLED"
(allowing manual stop through the same
botton) or "NOT ENABLED" (excluding
manual stop).
PROG. STANDARD.: There are five ways to
input standard programming functions:
One: Hold down the ENTER key for 5
seconds. The display will read COFFEE
DOSES and, after 5 seconds, the machine will
return to the MACHINE READY status, inser-
ting all standard doses, times and settings.
Two: Press the ENTER key once. The
display will read COFFEE DOSES. Press
the ENTER key once more to confirm, then
set coffee delivery times and the standard
hot water delivery times. The machine will
automatically return to the PROG. STAN-
DARD function. To return to the MACHINE
READY status, press the RESET key twice.
Three: Press the ENTER key once. The
display will read COFFEE DOSES. Press
the key and the display will read MILK
TIMES. Press ENTER to confirm and to set
the standard times for cappuccino, white cof-
to
fee and hot milk. The machine will automati-
cally return to the PROG. STANDARD func-
tion. To return to the MACHINE READY
status, press the RESET key twice.
Four: Press the ENTER key once. The
display will read COFFEE DOSES. Press
the key twice and the display will read
DISCHARGE TIMES AND GRINDING.
Press ENTER to confirm and to set the stan-
dard times for coffee grounds discharge and
for coffee grinding. The machine will auto-
matically return to the PROG. STANDARD
function. To return to the MACHINE
READY status, press the RESET key twice.
Five: Press the ENTER key once. The
display will read COFFEE DOSES. Press
the key three times and the display will
read VARIOUS SETTINGS. Press ENTER
to confirm and to set the standard variables
for all other functions. The machine will
automatically return to the PROG. STAN-
DARD function. To return to the MACHINE
READY status, press the RESET key twice.