NORAUTO 2222088/NO6763 Instrucciones De Uso página 137

OPERATING INSTRUCTIONS
IMPORTANT: ALWAYS disconnect the AC power cord from the AC power outlet before
connecting (or disconnecting) the charger to (or from) the battery.
IMPORTANT: This power system is to be used ONLY on cars with 12V DC or 24V DC
battery system. Do NOT connect to a 6V DC battery system.
Connecting the charger and charge the Battery with the Battery Clamps
IMPORTANT: Before start connecting, unplug the battery Charger AC cord from the AC
outlet. Disconnect the battery clamps from the unit at output cord connector.
The charger's battery clamps are color-coded (RED-POSITIVE and BLACK-NEGATIVE).
1 - Connect the RED POSITIVE clamp to the POSITIVE
post of the battery.
2 - Connect the BLACK NEGATIVE clamp to the NEGATIVE
post of the battery.
Connect the battery clamp connector to the unit connector, as
far away from the battery as possible.
Plug the unit onto the power socket.
1
2
3
* The charger remains in Float Charge Mode as long as the
charger is connected to the battery and is plugged into a
functioning AC mains socket.
To Start the Charging
Press CHARGER button, to select the charging voltage
mode (12V or 24V) according to the battery voltage.
Attention: Please wait for few seconds to toggle the 12V or
24V charging mode by pressing the button.
137
4