Stihl HS 75 Manual De Instrucciones página 26

Definitions
1. Front Handle.
Handle bar for the left hand at front
of hedge trimmer.
2. Spark Plug Boot.
Connects the spark plug with the
ignition wire.
3. Blade Lock.
Helps to prevent movement of
cutting blades during starting.
4. Fuel Filler Cap.
For closing the fuel tank.
5. Rear Handle.
The support handle for the right
hand, located at or toward the rear
of the hedge trimmer.
6. Cutting Blades.
Steel blades for cutting hedges and
shrubs.
HS 75, HS 80
7. Cutting Blade Scabbard.
Covers cutting blades when hedge
trimmer is not in use.
8. Shroud.
Polymer housing which encloses
the power unit.
9. Choke Lever.
Eases engine starting by enriching
mixture.
10. Filter Housing.
Housing, which covers the air filter.
11. Carburetor Adjustment Screws.
For tuning carburetor.
12. Starter Grip.
The grip of the pull starter, which is
the device to start the engine.
13. Slide Control.
Lever for starting throttle and stop
switch.
English / USA
14. Fuel Tank.
For gasoline and oil mixture.
15. Muffler.
Reduces engine exhaust noise and
directs the exhaust gases.
16. Throttle Trigger.
Controls the speed of the engine.
17. Throttle Trigger Interlock.
Must be depressed before
activating the throttle trigger.
18. Twist Lock.
Lever for rotating the rear handle.
19. Cutting Blade Guard.
Helps to reduce the risk of operator
contact by the cutting blades.
20. Fuel Pump.
Provides additional fuel feed for a
cold start.
25