Stihl MS 311 Manual De Instrucciones página 34

English
Starting
N with the right hand, pull the starter
grip slowly until you feel it engage –
and then give it a brisk strong pull –
simultaneously press down on the
handlebar – do not pull the starter
rope out all the way – risk of
breakage! Do not let the starter grip
snap back – guide it slowly back into
the housing so that it can rewind
properly
With a new engine or after a long period
of disuse, with machines without an
additional manual fuel pump, it may be
necessary to pull the starter rope several
times - to prime the fuel line.
Starting the chain saw
There must not be anyone within
the swivel range of the chain saw.
32
N Press the button, the
decompression valve will be
opened
The decompression valve is closed
automatically when the engine starts for
the first time. For this reason, press the
button again before each additional
starting procedure.
0
1
4
N Push the hand guard (1) forwards –
the saw chain is blocked
N Simultaneously press the throttle
trigger interlock (2) and throttle
trigger (3) – set master control
lever (4)
Position choke shutter closed l
– if engine is cold (even if the engine
has stalled during opening of
throttle after starting)
Position starting acceleration n
– if engine is warm (once the engine
has been running for approx. one
minute)
N Hold and start the chain saw
When the engine has turned over for
the first time
N Move the Master Control lever (1) to
the position starting acceleration n
N Press the button on the
decompression valve
N Hold and start the chain saw
2
3
STOP
0
1
MS 311, MS 391