Console (Fig F); Functional Button; Functions And Operations - Tunturi Cardio Fit bike B35 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48

Console (fig F)

1. Display
2. Tablet/ book support
3. Buttons
CAUTION
Keep the console away from direct sunlight.
Dry the surface of the console when it is covered
with drops of sweat.
Do not lean on the console.
Only touch the display with the tip of your finger.
Make sure that your nails or sharp objects do not
touch the display.
NOTE
The console switches to standby mode when
the equipment is not used for 4 minutes. If the
console is in standby mode, the display shows
the room temperature

Functional button

MODE
-
Press MODE button to select console functions;
Time, Speed, Distance, Odometer, Calories, Pulse.
-
Push and hold for 4 seconds to reset: Time,
Distance, Calories & Pulse.
SET
Set the values for: Time, Distance, Calories & Pulse,
when not in scan mode.
-
Press SET button to set console in goal input mode.
-
Press MODE to select goal you like to set. (the
selected goal will blink when able to set value.)
-
Press SET Button to higher the goal input, hold
SET button for 3 seconds to automatically higher
the value fast. Press SET button shortly to stop
Automatically higher the value.
-
Press RESET button shortly to reset the changed
selected goal.
-
Press MODE Button to active next optional goal to
be set.
TIME
+ 1 min
SPEED
DIST
+ 0,5KM
ODO
CAL
+ 1
PULSE
+ 1
NOTE
:
When you set a goals the set goal value will
count down in active mode.
When goal is reached the console will notify by
4 dual acoustic beep signals. The reached value
will now count up starting from "0".
You can set more than one goal, all goals will
notify when goal is reached.
When you set a limit for pulse, the console will
notify by a continues triple acoustic beep signal
when exceed the set limit.
RESET
-
Push and hold for 4 seconds to reset: Time,
Distance, Calories & Pulse.
NOTE
:
ODOMETER can only be reset by a batteries
exchange.

Functions and operations

Scan
-
Automatically scan functions for : Time, Speed,
DIistance, Odometer, Calorie & Pulse.
-
Each display will be hold 4 seconds
Time
-
Automatically accumulates workout time when
exercising.
Speed
-
Display current speed when exercising.
1 5
English
( 1 ~ 99)
( max. 99,9 Km/h)
( 0,5KM ~ 99,50Km )
( max. 999,9 Km)
( 1 ~ 999 )
( 40 ~ 240
)

Publicidad

Tabla de contenido
loading

Tabla de contenido