Walgreens WGNBPW-210 Manual página 21

WGNBPW-210 LCD (Option A)
1. Press the "
2. With the cuff wrapped around your wrist, press the "START/STOP"
button. Do not inflate the cuff unless it is wrapped around your wrist.
All digits will light up, checking the display functions. The checking
procedure will be completed after about 3 seconds.
LCD display
Inflating and measuring.
3. After all symbols disappear, the display will show "0." The monitor
is ready to measure and will automatically inflate the cuff to begin
measurement.
4. When the measurement is completed, the
cuff will deflate entirely. Systolic pressure,
diastolic pressure, and pulse will be shown
simultaneously on the LCD screen. The
measurement is then automatically stored
into memory.
NOTE:
• This monitor automatically turns off
approximately 1 minute after last operation. You may also press the
"START/STOP" button to turn the unit off.
• To interrupt the measurement, you may press the "START/STOP"
(recommended) or the "MEM" or "Date & Time Set"
The cuff will deflate immediately after this button is pressed.
" button and select User 1 or User 2.
LCD display
Inflating and measuring.
20
Start the measurement.
Start the measureme
Display and save the result.
Display and save the
buttons.