Date & Time Set Procedure - Walgreens WGNBPW-210 Manual

DATE & TIME SET PROCEDURE
It is important to set the Date & Time before using your blood
pressure monitor, so that a time stamp can be assigned to each
record that is stored in the memory.
1. To set the date and time, press the
"Date & Time Set"
2. The display will show a blinking number representing the MONTH.
Change the MONTH by pressing the "MEM" button. Each press
will increase the number by one in a cycling manner. Press the
button again to confirm the entry. The screen will then show
a blinking number representing the DAY.
3. Change the DAY, YEAR, HOUR, & MINUTE as described in step
2 above, using the "MEM" to change the numbers and the
button to confirm the entries.
Repeat process to set DAY, YEAR, HOUR and MINUTE.
IMPORTANT: IF YOU ARE USING THIS BLOOD PRESSURE MONITOR FOR THE FIRST
TIME, PLEASE REMOVE THE PROTECTIVE FILM FROM THE DISPLAY SCREEN.
button.
"MEM"
14
Press the button
Blinking Month
Increase Month
Confirm Entry
SYS
mmHg
DIA
mmHg