Polarized Plug Instructions; Short Cord Instructions - Kalorik TO 39085 Manual De Instrucciones

Fax +1 305 430 9280
14. Oversized foods, metal foil packages, or utensils must not be
inserted in a toaster as they may involve a risk of fire or electric
shock.
15. A fire may occur if toasters are covered or touching flammable
material, including curtains, draperies, walls, and the like, when in
operation.
16. Do not attempt to dislodge food when toaster is plugged in.
17. IMPORTANT: If the bread carriage handle gets blocked during use
(e.g. because the bread slices are too thick) and the bread starts
burning, unplug the appliance immediately and let it cool down
before emptying and cleaning it. Should the problem persist,
contact a qualified electrician.
18. Do not use the appliance for defrosting food other than bread
and only insert unbuttered slices of bread of which the thickness
does not risk to prevent the bread from coming up. Be extremely
strict about this as toasters are the cause of many fires when
these elementary safety precautions are not observed.
19. The appliance shall not be operated using a separate timer or
separate remote device.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY

POLARIZED PLUG INSTRUCTIONS

This appliance is equipped with a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock, this plug will fit
into the polarized outlet only one way. If the plug does not properly
fit into the outlet at first, reverse it. If it still does not fit, contact a
qualified electrician. Do not attempt to modify the plug in any way.

SHORT CORD INSTRUCTIONS

A short power supply cord is provided to reduce the hazards resulting
from becoming entangled in, or tripping over a longer cord.
Extension cords may be used if care is exercised in their use.
Copies of the I/B. Please reproduce them without any
changes except under
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame.
3
Assembly page 3/28
special instruction from Team
Print only
TO 39085 - 120501