6-3-4
Sound Test
1.
Select "Sound Test" from the menu screen to adjust the volumes and to test the
sound. The following screen is displayed.
2.
Use the Up/Down select switch to choose the required item then press the Enter
button.
3.
Use the Up/Down switch to change the setting.
4.
Press the Enter button after changing the settings to select another item.
5.
Select "EXIT" and press the Enter button to return to the MENU screen.
VOLUME
REQUEST SONG No.
MESSAGE
EXIT
ENTER :
(a)
When selected, all sound channels are changed together.
(b)
Volume setting for the right channel speaker. Settable from 0 ~ 64 with 0 the
quietest and 64 the loudest.
(c)
Volume setting for the left channel speaker. Settable from 0 ~ 64 with 0 the
quietest and 64 the loudest.
(d)
Volume setting for the tank speaker. Settable from 0 ~ 64 with 0 the quietest
and 64 the loudest.
(e)
Volume setting for the attract mode sound. Settable from 0 ~ 64 with 0 the
quietest and 64 the loudest.
(f)
Each number represents a different sound each time the Service button is
pressed. (The sound will last for a maximum of 10 seconds).
001 when selected will produce sound from the left speaker only, then the
right speaker only and then the tank speaker only. The message field will
display which speaker is active.
SOUND TEST
ALL
(0 - 64)
RIGHT SP
(0 - 64)
LEFT SP
(0 - 64)
TANK SP
(0 - 64)
ATTRACT
(0 - 64)
001
CHOOSE :
PLAY : SERVICE
Page 47
......................... (a)
45 ......................... (b)
45 ......................... (c)
65 ......................... (d)
55 ......................... (e)
......................... (f)