Switch Test - NAMCO 500 GP Dlxe Manual Del Operador

6-3-3-1 Switch Test

1. Select "Switch Test" from the I/O menu screen to test the switches.
The following screen is displayed.
2. The screen displays the current state of the switches.
3. Press the Up Select switch and the Enter button at the together to exit and
return to the I/O menu screen.
DIP 4
(a) ......................... GAS
(b) ......................... BRAKE
(c) ......................... BANK
(d) ......................... TEST
(e .......................... COIN
(f) .......................... TANK
(a) The numbers change as the throttle is turned. OK appears when the throttle
is full on.
(b) The numbers change as the brake lever is pulled. OK appears when the
brake is fully on.
(c) The numbers change when the bike is leaned right and left. CENTER,
RIGHT and LEFT is displayed when the bike is in the central, fully right and
fully left positions.
(d) The Test switch must always be ON. If the test switch is turned off the game
will revert to normal game mode.
(e) The number will increase each time the CashFlow outputs a coin signal.
(f) OFF changes to ON when you lean towards the handle bar assembly to
activate the speed sensor.
(g to k) OFF change to ON when the respective switch is activated.
SWITCH TEST
12345678
LINK OFF
SWITCH TEST [ON : RED]
0000 SERVICE
0000 VIEW
0000
ON
OFF 0
OFF
TO EXIT PUSH AND
Page 46
[ON : RED]
OFF ...................... (g)
OFF ...................... (h)
OFF ...................... (i)
OFF ...................... (j)
OFF ...................... (k)