Schumacher Battery Extender SP2 Manual Del Usuario página 9

Cargador de baterías automático/mantenedor
Ocultar thumbs Ver también para Battery Extender SP2:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

RING TERMINAL QUICK-CONNECT
The ring connectors permanently attach to the battery, providing easy access
to quickly connect the charger to your battery. This application is appropriate for
motorcycles, lawn tractors, ATVs and snowmobiles.
1. To permanently attach to a battery, loosen and remove each nut from the bolt
at the battery terminal.
2. Connect the red POSITIVE connector ring to the POSITIVE battery terminal.
3. Connect the black NEGATIVE connector ring to the NEGATIVE battery terminal.
4. Replace and tighten the nuts to secure.
5. Connect the cable to the end of the charger output cord.
Take care to keep the wires and plug away from metal and moving parts.
6. Plug the charger power cord into a grounded 120V AC electrical wall outlet.
BATTERY CHARGING TIMES
CCA = Cold Cranking Amps RC = Reserve Capacity
Ah = Amp Hour
BATTERY SIZE/RATING
SMALL BATTERIES
Motorcycle, garden tractor, etc.
CARS AND TRUCKS
MARINE/DEEP-CYCLE
Times are based on a 50% discharged battery and may change, depending on
age and condition of battery.
200-315 CCA
315-550 CCA
550-1000 CCA 85-190 RC
• 9 •
CHARGE TIME
6-12 Ah
12-32 Ah
40-60 RC
MAINTAIN ONLY
60-85 RC
MAINTAIN ONLY
MAINTAIN ONLY
80 RC
MAINTAIN ONLY
140 RC
MAINTAIN ONLY
160 RC
MAINTAIN ONLY
180 RC
MAINTAIN ONLY
(1A)
4-7½ h
7½-20 h

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Battery extender spss2

Tabla de contenido