Control Panel - Schumacher Battery Extender SP2 Manual Del Usuario

10. FEATURES

11. CONTROL PANEL

LED INDICATORS
POWER (red) LED lit: There is AC power supplied to the battery charger.
CHARGING (yellow/orange) LED lit: The charger is charging the battery.
CHARGING (yellow/orange) LED flashing: The charger is in abort mode.
CHARGED (green) LED pulsing: The battery is fully charged and the
charger is in maintain mode.
12. OPERATING INSTRUCTIONS
IMPORTANT: Do not start the vehicle with the charger connected to the AC
outlet, or it may damage the charger and your vehicle.
CHARGING A BATTERY IN THE VEHICLE
1. Turn off all the vehicle's accessories.
2. Keep the hood open.
3. Clean the battery terminals.
4. Place the charger on a dry, non-flammable surface.
5. Lay the AC/DC cables away from any fan blades, belts, pulleys and other
moving parts.
6. Connect the battery, following the precautions listed in sections 6 and 7.
7. Connect the charger to an electrical outlet. The POWER
1
2
3
4
• 7 •
1. LED indicators:
POWER (red)
CHARGING (yellow/orange)
CHARGED (green)
2. Battery clamp quick-connect
3. Ring terminal quick-connect
4. Quick-connect connector
(red) LED will light.