Bosch PMF 250 CES Manual Original página 18

18 | English
Application tool
Bi-metal plunge cut
saw blade for wood
and metal
TC-Riff segment
saw blade
Diamond-Riff seg-
ment saw blade
TC-Riff Delta plate Mortar, concrete residue,
TC-Riff grout and
mortar remover
HCS multi blade
Scraper, fixed
Scraper, flexible
Bi-metal segment
serrated blade
TC-Riff sanding fin-
ger
TC-Riff plunge cut
saw blade
HCS universal joint
cutter
Fitting/changing the application tool (AutoClic)
(see figures A–B)
Remove the application tool if one has already been fitted.
1 609 92A 675 | (02.02.2021)
Material Application
Softwood, hardwood, Plunge cuts in laminated boards or hardwood;
veneered boards, plastic- example: Shortening door frames, recesses for a shelf
coated boards, non-
hardened nails and
screws
Cement joints, soft wall Making cuts near edges, in corners or in difficult-to-reach
tiles, fibreglass-reinforced areas;
plastics, porous concrete example: Removing joints between wall tiles for improve-
ment work, cutting recesses in tiles, plasterboard or
plastics
Cement joints, soft wall Precise routing and cutting of tile/joint material, epoxy
tiles, epoxy resin, fibre- resin and fibreglass-reinforced plastics;
glass-reinforced plastics example: Producing small cut-outs in soft wall tiles and
routing recesses in fibreglass-reinforced plastic
Rasping and sanding on a hard surface;
wood, abrasive materials example: Removing mortar or tile adhesive (e.g. when re-
placing damaged tiles), removing carpet adhesive residue
Mortar, joints, epoxy Routing and cutting of joint material and tile material, as
resin, fibreglass-rein- well as rasping and sanding on a hard surface;
forced plastics, abrasive example: Removing tile adhesive and joint mortar
materials
Roofing felt, carpets, arti- Fast and precise cutting of soft material and flexible abras-
ficial turf, cardboard, PVC ive materials;
flooring example: Cutting carpets, cardboard, PVC flooring, roof-
ing felt, etc.
Carpets, mortar, con- Scraping on a hard surface;
crete, tile adhesive example: Removing mortar, tile adhesive, concrete
residue and carpet adhesive residue
Carpet adhesive, paint Flexible scraping on a soft surface;
residue, silicone example: Removing silicone joints, carpet adhesive
residue and paint residue
Insulation material, insula- Precise cutting of soft materials;
tion boards, floor panels, example: Cutting insulation boards to size, cutting pro-
impact sound insulation truding insulation material to length so that it is flush with
boards, cardboard, car- the surface
pets, rubber, leather
Wood, paint Sanding of wood or paint in hard-to-reach areas without
sanding paper;
example: Sanding off paint between window shutter slats,
sanding wooden flooring in corners
Fibreglass, mortar, wood Plunge cuts in extremely abrasive materials;
example: Routing of thin mosaic tiles
Expansion joints, window Cutting soft materials;
putty, insulation materials example: Cutting silicone expansion joints or window
(rock wool) putty
To do so, open the AutoClic lever (1) all the way. The applic-
ation tool/accessory will be ejected.
Bosch Power Tools