Hansgrohe Talis C 14113 1 Serie Manual Del Usario página 6

English
Place the handles over the valve mounting nuts.
Fasten the handles to the nuts by rotating the
escutcheons clockwise.
The handles should be parallel to the basin.
If necessary, loosen the screws and rotate the
valve slightly (1).
Tighten the tensioning screws using a screwdriver
(2).
2.
1.
Alternately, if the handle is not aligned correctly,
2.
remove it (1).
3.
Reposition the handle (2).
Install the handle (3).
1.
6