English – 8
eShift with the Kiox on-board computer
With the NuVinci/enviolo gear shifting, the desired cadence
can be changed while riding using the operating unit.
To do this, press the select button and use the right-hand
button to navigate to the <Cadence> option. Then adjust the
value using the + or – button on the operating unit. Next time
you open the <Settings> menu, the <Cadence> option will
immediately be displayed, as the last setting on your on-
board computer will have been saved. Kiox does not support
a manual switching mode.
Under <Calibration>, you can calibrate the continuously
variable transmission. Then follow the instructions on the
display.
In the event of an error, it may also be necessary to perform
calibration when riding. Confirm the calibration here too,
and follow the instructions on the display.
0 275 007 XES | (06.02.2019)
Bosch eBike Systems