Package Contents; Operating Elements - Eschenbach mobilux DIGITAL Inspection Manual De Instrucciones

Package contents

X mobilux DIGITAL Inspection electronic testing device
X Charger (with plugs for EU, GB, US and AUS)
X USB cable, length 2 m
X SD card (4 GB, supplied preinstalled)
X Plastic case
X Wrist strap

Operating elements

1. Touch-sensitive display
2. On/Off button
3. USB/charging socket
4. Eyelet for wrist strap
5. Charging indicator LED
6. Cover for SD card slot
7. SD card slot
8. Reset opening
9. LED lighting
10. Camera
11. Cap for standard tripod thread
12. Contact surfaces
Operation
Charging the internal battery:
Before you use the mobilux DIGITAL Inspection for the first time, you must fully
charge the internal battery.
To charge the device, plug the mini USB plug of the charging cable into the USB/
charging socket (e) on the mobilux DIGITAL Inspection. Then connect the charger with
the plug appropriate for the operating location and plug the charger into a power outlet.
Charging takes about 2 hours. The charging indicator LED (t) will light up red during
the charging process. Once the charging process is complete, the charging indicator
LED goes out. Disconnect the charger from the power socket and the mobilux DIGI-
TAL Inspection once charging is completed.
You can use the mobilux DIGITAL Inspection during the charging process. Using the
reader while charging will, however, prolong the charging time.
- 19 -
Package contents