Operation - ESAB Warrior Feed 304 Manual De Instrucciones

US
Note! If another mounting device is used, this should be insulated from the wire feed
unit.
FASTEN THE EQUIPMENT
THE GROUND IS UNEVEN OR SLOPING.
If equipment is placed on a surface that slopes more
than 10°, toppling over may occur. Personal injury
and/or significant damage to equipment is possible.
8

OPERATION

General safety regulations for the handling of the equipment can be found on
page 9. Read through before you start using the equipment!
TO AVOID SHOCK, DO NOT TOUCH ELECTRODE WIRE OR PARTS IN
CONTACT WITH IT, OR UNINSULATED CABLE OR CONNECTIONS.
When moving the equipment use intended handle. Never pull on the torch.
bm55d1a
–
PARTICULARLY IF
- 13 -
© ESAB AB 2013