WAGNER FURNO 550 El Manual Del Propietario página 6

Using the Heat Gun
Always read the safety information
included in this manual before
using the heat gun.
Component Description (Fig. 1)
1) Graphic LED screen and control panel
2) Hanging hook
3) Cordset with integrated stabilizers
4) Rear stabilizer fins (stand)
5) Side bars to prevent nozzle touching
surface
6) Heat shield
1
1
6
5
2
6
EN
Attaching the power cord (Fig. 2)
The power cord (Fig. 2, 1) for the heat gun is
delivered detached from the gun (Fig. 2, 2).
To attach, line up the cord by the forward facing
groove with the socket on the handle of the gun
and press together until you hear a click.
This will permanently attach the cord. It cannot
be removed once installed.
2
4
3
2
1
Hands-free operation (Fig. 3)
The heat gun has an integrated stand for bench
top applications and cool down mode.
3