Installation; Before Installing The Range - LG LRG3061ST Manual Del Propietário

INSTALLATION

13
InSTALLATIOn

Before Installing the range

Make sure the range is properly installed and grounded by a qualified installer, according to the installation
instructions. Any adjustment and service should be performed only by qualified gas range installers or service
technicians.
In the Commonwealth of Massachusetts
• This product must be installed by a licensed plumber or gas fitter.
• When using ball type gas shut-off valves, they must be the T-handle type.
• When using a flexible gas connector, it must not exceed 3 feet in length.
Preparing for Installation
Tools needed
Phillips screwdriver Flat-blade screwdriver Pencil and ruler
Open-end or adjustable Pipe wrench (2) Level
wrench (one for support)
Materials You May need
• Gas line shut-off valve
• Pipe joint sealant that resists action of natural and LP gases
• Flexible metal appliance connector ( / " or / " NPT x / " I.D.)
3 1 1
4 2 2
Never use an old connector when installing a new range.
• Flare union adapter for connection to gas supply line ( / " or / " NPT x / " I.D.)
3 1 1
4 2 2
• Flare union adapter for connection to pressure regulator on range ( / " NPT x / " I.D.)
1 1
2 2
• Liquid leak detector or soapy water
• Lag bolt or / " O.D. sleeve anchor (for concrete floors only)
1
2