Maintenance And Service - Garland APACHE 675 SL Manual Do Operador

Cut less than 2 cm of grass at a time. If your lawn is
very high, it is advisable to make successive passes
with the 2 cm cutting height every time. So no it will
force both machine.
Cut your lawn often, at least once a week in spring
and summer.
Do not always make the same route when mowing. It
is best to change your route to avoid the grass being
cut in the same direction.
If you need to move the mower between two lawn
areas always first switch off the mower.
Sharpening the blade: A dull blade requires more
energy. A dull blade also cuts badly and makes the
grass yellow.
To obtain a green and bushy lawn, it is necessary to
frequently cut and aerate it regularly, providing the
necessary manure or fertilizer.
The cutting frequency will depend on growth (May-
June). You will need to cut one or two times a week.
At other times of the year, it will be enough to cut it
only once a week.

8. MAINTENANCE AND SERVICE

Perform the following maintenance operations
and care when you have finished working with
the machine to ensure the smooth running of this
machine in the future. For complete maintenance, we
recommend you take the lawnmower to your service
technician.
Perform maintenance with the frequency indicated in
the following table:
Try to stop the engine and check that the cutting
tool is stopped before cleaning or transporting the
machine.
It is necessary to stop the engine cleaning or
transporting the machine.
Before performing any maintenance or repair
on the machine make sure that the engine
has stopped and remove the spark plug pipe.
Only perform machine maintenance with the machine
on a flat, cleared surface.
Do not attempt to repair the lawnmower when it is
on or in motion.
WARNING! Do not modify the machine or cutting
elements (blade). Improper use of these elements
can cause SERIOUS PERSONAL DAMAGE OR DEATH.
Use only suitable replacement for this machine in
order to obtain a proper performance of the machine.
This replacement can be found in the official
distributors of the machine. The use of other spare
parts can cause risks, damage to the user, people
around and the machine.
Do not adjust the carburetor. If necessary, take your
machine in for service. Carburetor adjustment is
complicated, and only the technical maintenance
service must do them. Incorrectly setting the
carburetor may cause damage to the engine and will
be cause for cancellation of the warranty.
49/184
English