CAMPAGNOLO H11 Manual De Usuario página 33

• Do not expose the products to high temperature, do not leave them closed in cars
parked under the sun, do not keep them near radiators or other heat sources, do not
leave carbon or plastic products in direct sunlight.
7.1 - PROCEDURE FOR CRANKSET CLEANING AND LUBRICATION
• Before lubricating, carefully clean the drivetrain (system, sprocket pack, chainrings
and rear derailleur wheels) with a brush or cloth soaked in a specific degreaser/deter-
gent. In the case of dust or mud, remove any residuals with specific plastic tools.
• Dry the drivetrain with a soft cloth: never use abrasive sponges or metal scouring
pads.
• Carefully lubricate the components, using a specific chain lubricant.
• After application, turn the hand cranks using all the possible gear combinations in
order to properly lubricate the entire drivetrain.
• Carefully clean any remaining lubricant remaining on the bicycle or the floor.
WARNING!
Lubricant residues on the rims, discs and brake pads can decrease or nullify your
bicycle's braking capacity, and can lead to accidents, physical injuries, or even death.
ENGLISH 33