Before Using Your Bicycle - CAMPAGNOLO H11 Manual De Usuario

4 - BEFORE USING YOUR BICYCLE

DO NOT RIDE YOUR BICYCLE IF IT DOES NOT PASS THIS PRE-RIDE TEST CORRECT
ANY CONDITION BEFORE YOUR RIDE.
• Make sure that the wheels' locking mechanism is properly adjusted (see the "Quick
Release" instruction sheet, or refer to the assembly instructions provided by the manu-
facturer of the bicycle or fork in the case of a thru-axle). Bounce the bicycle on the
ground to check for any loose parts.
• Be sure that none of the components of bicycle are bent, damaged or out of ali-
gnment.
• Check to be sure that all quick release fasteners, nuts and bolts are properly adjusted.
Bounce the bicycle on the ground and listen and look for anything which may be loose.
• Make sure the wheels are perfectly centred. Spin the wheel to make sure that it does
not wobble up and down or from side to side, that it does not come into contact with
the fork, and that the disc does not touch the brake callipers' pads.
• Check all reflectors to make sure that they are clean, straight and securely mounted.
• Make sure that the brake system and the brake callipers' pads are in good condition.
• Test your brakes in the beginning of your ride to make sure that they are operating
properly.
• Learn and follow the local bicycle laws and regulations, and obey all traffic signals,
signs and laws while you ride.
If you ever any comments, questions or concerns, please contact your nearest
Campagnolo Service Center. A list of service centers may be found on our website
at www.campagnolo.com.
ENGLISH 27