Flex FX2241 Manual Del Operador página 12

WARNING
product damage due to a short circuit, never
immerse your tool, battery pack, or charger
in fluid or allow a fluid to flow inside them.
Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc. can
cause a short circuit.
WARNING
this product until the parts are replaced. Use
of this product with damaged or missing parts
could result in serious personal injury.
WARNING
accessories not recommended for use with
this tool. Any such alteration or modification is
This one-handed reciprocating saw must be used only with the battery packs and chargers
listed below:
2.5Ah 5Ah
FLEX FX0111 FLEX FX0121
NOTICE: Please refer to the battery pack and charger manuals for detailed operating
information.
LOCK-OFF BUTTON (FIG. 5A & 5B)
Your tool is equipped with a lock-off button,
located above the variable-speed trigger
switch, to prevent the saw from being activated
unintentionally.
To lock the switch in the off position, push the
side of the lock-off button marked
left (Fig. 5a).
OPERATING INSTRUCTIONS
To reduce the risk of fire,
personal injury, and
If any parts are damaged
or missing, do not operate
Do not attempt to modify
this tool or create
Battery Pack
8Ah
FLEX FX0221
to the far
misuse and could result in a hazardous
condition leading to possible serious injury.
WARNING
serious personal injury, always remove the
battery pack from the tool when assembling
parts.
WARNING
detach the battery pack after finishing work
or when taking breaks.
WARNING
with side shields during power tool
operation. If the operation is dusty, also
wear a dust mask.
WARNING
12Ah
FLEX FX0231
Fig. 5a
-12-
To prevent accidental
starting that could cause
To prevent accidental
starts and possible injury,
Always wear safety
goggles or safety glasses
Wear protective gloves.
Charger
160W 280W
FLEX FX0411 FLEX FX0421
Lock