Symbols Used - CAMPAGNOLA MC Serie Manual De Uso Y Mantenimiento

1.4

SYMBOLS USED

The manual uses symbols to catch the reader's attention when necessary to stress some relevant aspects of
its content.
The following chart explains the meaning of the symbols used.
SYMBOL
Danger
Attention
!
Warning
Note
Instructions
Visual control
Danger due to moving parts
Prohibition to remove
guards and protections
Prohibition to smoke or use
machine or to engines or to
electric boards
Prohibition to enter for the
non-authorised people
Noise risk
Campagnola Srl
MEANING
Indicates the danger of accident and possibly fatal risk for the
operator and the surrounding personnel.
Pay maximum attention to the paragraphs showing this
symbol.
Warning about the possibility of wear and tear or damage to
the machine or its accessories or to the personal belongings
of the Customer/end-user.
Pay maximum attention to the paragraphs showing this
symbol.
Indicates a warning or a note about key-functions or useful
information.
Pay maximum attention to the paragraphs showing this
symbol.
Stresses that it is a compulsory instruction for the end-
user and/or maintenance operator to read the Use and
Maintenance Manual supplied with the machine.
Indicates that the reader has to make a visual observation.
This symbol can be found in the use instructions.
The end-user is asked to read a measure value, to check a
warning, etc..
of the machine.
The end-user or the personnel shall pay maximum attention
to the warnings and the areas with this symbol and keep at
a safe distance.
Indicates that the removal of machine guards and protections
by the end-user or the personnel is strictly forbidden.
It is absolutely forbidden to operate the machine without the
protections supplied.
Pay maximum attention to the warnings and areas showing
this symbol.
vicinity of the machine, its engines/motors or electric boards
is strictly forbidden.
All the regulations of the Country where the machine is used,
as well as all the inner regulations of the factory or plant,
as established by the employer, are also to be considered.
Indicates the prohibition for the non-authorised personnel to
go close to and/or to cross the area where this warning is
present.
The end-user or the personnel shall pay the maximum
attention to the warnings and areas with this symbol and
keep at a safe distance.
Indicates zones, areas and/or machines with a noise level
which is higher than 85 dB (A).
The end-user or the personnel shall not enter these areas or
use these machines without ear protections.
The end-user or the personnel shall pay the maximum
attention to the warnings and areas with this symbol and
keep at a safe distance.
NOTES