Accessories; General Working Characteristics - CAMPAGNOLA MC Serie Manual De Uso Y Mantenimiento

3.5

ACCESSORIES

The machine can be supplied with various accessories and/or optional extras, such as hoses, harvesters, etc.,
according to the model chosen.
The accessories are shown on the company catalogue
3.6

GENERAL WORKING CHARACTERISTICS

The engine-driven compressor can only be used for operating pneumatic tools for pruning, harvesting or other
agricultural purposes.
The compressor block is powered by a gasoline or a diesel engine, connected by means of a drive belt or directly
The compressor block provides a constant pressure in the tank, maintaining it between the maximum and the
minimum pre-set value.
the air tank, which will then allow a saving in fuel, mechanical parts wear and tear and exhaust smoke emissions.
the MC360 and MC210 series having a 1/4" lubricator.
!
ATTENTION
It is entirely the responsibility of the end-user to ensure that the machine is placed on a stable and
It is forbidden to operate the machine on a slope when either moving it or letting it stand. This guarantees
or damages.
The operator can hand-move the machine only when the engine is off.
its pressure and enters the air tank.
The air tank functions as an accumulator and a cooling and condensed water (generated by the air compression)
collecting room.
air lubricator.
of the tool connected to the engine-driven compressor.
screw on the lubricator.
On the package and in the catalogue there are icons giving information about the compressors supplied by
Campagnola srl
Campagnola Srl