SWM Superdual 2017 Manual - Uso - Mantenimiento página 76

PROVISION FOR 12V POWER SUPPLY
The motorcycle is equipped with a connector to
power an external device with a voltage of 12V and
maximum absorption of 4.5A.
Proceed as follows to access the connector:
- Remove the casing (1) by pulling it outward.
- Extract the connector (2) and remove the cap (3).
NOTE:
Connect the device using the dedicated connector,
therefore remove the casing (1).
2
EN - 16
3
STEERING LOCK
The motorcycle comes with a steering lock located
on the ignition switch (1).
Lock the steering as follows:
- Turn handlebar to the left
- Insert key (2) in the ignition switch (1) set to OFF.
- Press the key in (2) and turn it anticlockwise to
position
- Remove the key (2).
To unlock the steering lock, reverse the above pro-
cedure.
1
1
2