American Standard Champion PRO 211AA Serie Instrucciones De Instalación página 3

3
Apply weight evenly.
Do not move after
placement. Water
tight seal may break.
5
7
A
Connect water
supply line.
(Sold separately)
Hand tighten nut.
B
Turn on water supply.
4
Hand tighten
!
only. Do not
overtighten.
NOTE: 1/4" EZ-BOLT
AND CAP SHOWN.
IF 5/16" BOLT USE
STANDARD DISK AND
CAP INCLUDED.
6
Tighten handles
alternately until the
tank contacts the
front and back of the
bowl achieving
china-to-china
contact.
NOTE: To ease
installation, push
down on the top of
the tank while
tightening handles.
WARNING: Overtightening of
!
water supply line nuts could
result in breakage and potential
flooding. If the connection leaks
after hand tightening, replace
the supply line. Do not use any
type of sealant on the water
supply
plumber's putty, pipe dope, or
any other type of sealant will
void the warranty.
- 3 -
connection. Use
73 018 3 6 - 10 0 Rev. C
of