Avoiding Radio Interference; Assembling The Accessories; Glass Turntable; Metal Rack - Caso Germany MG 20 Menu pure white Manual Del Usuario

Ocultar thumbs Ver también para Germany MG 20 Menu pure white:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 128
11.5.2

Avoiding radio interference

The device can cause the occurrence of interference in radios, televisions
or similar devices.
Such faults can be rectified or reduced as a result of employing the
following measures:
• Clean the door and the sealing surfaces of the device.
• Set the radio, the television, etc as far as possible away from the
device.
• Connect the device to a different electrical outlet, so that various power
circuits are used for the device and the receiver with the interference.
• Use a properly installed antenna for the receiver, to ensure good
reception.

11.6 Assembling the accessories

► The device can be operated with glass turntable or with glass turntable
and metal rack.

11.6.1 Glass turntable

Assemble the glass turntable as follows:
• Insert the rolling ring
• Insert the glass turntable so the groove on the underneath side of the
glass turntable catch in the drive shaft.
► When operating the grill, the metal rack can also be used in order to
grill the food evenly as a result of the rotation.

11.6.2 Metal rack

• Insert the metal rack onto the glass turntable.
caso MG 20 Menu pure white
Please note
Please note
52

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido