Avoiding Radio Interference; Assembling The Accessories; Glass Turntable; Metal Rack - Caso ECO 25 MG Manual Del Usuario

Microondas y grill
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 176

14.5.2 Avoiding radio interference

14.6 Assembling the accessories

14.6.1 Glass turntable

14.6.2 Metal rack

caso ECO25MG
The device can cause the occurrence of interference in radios,
televisions or similar devices.
Such faults can be rectified or reduced as a result of employing
the following measures:
 Clean the door and the sealing surfaces of the device.
 Set the radio, the television, etc as far as possible away from
the device.
 Connect the device to a different electrical outlet, so that
various power circuits are used for the device and the
receiver with the interference.
 Use a properly installed antenna for the receiver, to ensure
good reception.
Please note
► The device can be operated with glass turntable or with
glass turntable and metal rack.
Assemble the glass turntable as follows:
 Insert the rolling ring
 Insert the glass turntable so the groove on the underneath
side of the glass turntable catch in the drive shaft.
Please note
► When operating the grill, the metal rack can also be used in
order to grill the food evenly as a result of the rotation.
Insert the metal rack onto the glass turntable.
Commissioning
81

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido