Using The Display Button - Sony PSP-1010 Manual De Instrucciones

Using the display button

The display button is used to adjust screen brightness.
Adjusting screen brightness
1
Press the display button.
Each time you press the button, the display changes as follows:
Level 1
Level 2
Level 3
(Level 4)
Hint
Level 4 can be selected only while the PSP
Turning off the backlight
1
Hold down the display button for more than one second.
The backlight will turn off and the screen will go blank.
If you press any of the system buttons, the screen will be displayed again.
POWER
HOLD
SELECT START
Darker
Brighter
®
system is plugged in using the AC adaptor.
Using the display button
US
185