Network Settings - Sony PSP-1010 Manual De Instrucciones

Network Settings

You can adjust the network settings to allow connection to a wireless local area
network (WLAN). There are two WLAN modes.
Warning
Turn off the WLAN switch when in crowded places, such as in a crowded
train. If a person nearby is using a pacemaker, it is possible that the radio
waves could affect the pacemaker.
Ad Hoc Mode
In this mode, you can communicate directly with other PSP
establish a connection in ad hoc mode, both PSP
Automatic or to the same channel. For details, refer to the instructions
" "
supplied with the ad hoc mode-compatible software.
Communication with other PSP
systems over a WLAN
Automatic
Ch 1, Ch 6 or Ch 11
The default setting for the menu item is underlined.
Infrastructure mode
In this mode, you can connect the PSP
point. This is used to connect to the Internet (
as Network Update (
Network Settings
260
®
Automatically switches to the optimum channel for
communication
Communicates using the specified channel
®
page 267).
systems must either be set to
®
system to a network using an access
page 234) or for features such
systems. To
®