Sony PSP-1010 Manual De Instrucciones página 265

8
Check the settings.
This screen displays the setting details. Press the left button to return to the
previous screens to correct any of the settings, if necessary.
After you have finished entering your settings, press the right button to go
to the next screen.
9
Save the connection.
Press the button to save the connection on your system.
10
Test the connection.
Before testing the connection, check that the PSP
is turned on.
Select "Test Connection", and then press the
connect to the selected access point.
11
Confirm the connection test results.
If the connection is successful, information about the network connection
is displayed. Press the
Hints
• The system will also perform an Internet connection test after connecting to an access
point. The results of the Internet connection test will be shown in the connection results
screen.
• If the connection test fails, follow the on-screen instructions to check the settings.
Network settings for the connection can be changed from the options menu
( page 266). For additional information, refer to the instructions supplied with the
network device and by your Internet service provider.
• If the IP address and DNS information will be obtained by a DHCP server, select
"Custom" in step 7. Each option will be set to "Automatic".
button to end the connection test.
system's WLAN switch
®
button. The system will
Network Settings
US
265